Resume; Pause; Step By Step Playback; Fast Forward/Reverse Search - Emerson EWC19T3, EWC27T3 Owner's Manual

RESUME

1
During playback, press the STOP button.
¡ Resume message will appear on the TV screen.
2
Press the PLAY button, playback will resume
from the point at which playback was stopped.
¡
To cancel resume, press the STOP button twice.
¡
If turn off the TV/DVD/VCR, resume function will
be cancelled.

PAUSE

1
During playback, press the PAUSE button.
¡ Playback will pause and sound will be muted.
2
To continue playback, press the PLAY button.

STEP BY STEP PLAYBACK

1
During playback, press the PAUSE button.
¡
Playback will pause and sound will be muted.
2
The disc goes forward by one frame each
time the PAUSE button is pressed.
3
To exit step by step playback, press the
PLAY button.
FAST FORWARD/REVERSE
SEARCH
1
During playback, press and hold down the FWD
or REV
g h
2
Each press and hold down the FWD
REV button repeatedly to select the
h
required speed: x2, x8, x50, x100.
For audio CDs, the speed is fixed at ×16.
¡
For MP3, the speed is fixed at ×8.
¡
3
To return to normal playback, press the
PLAY button.
Note for using buttons on the main unit:
During playback, press and hold down the SKIP G /
SEARCHg buttons or the SKIPH /SEARCHh
buttons on the TV/DVD/VCR for a few seconds to begin
Search in x2 speed. Press and hold down again to change
speed to x8. Repeat this procedure to change to x50 and
x100.
DVD-V
DVD-V
DVD-V
DVD-V CD MP3
button for a few seconds.
g
SLOW FORWARD /
SLOW REVERSE
CD
1
During playback, press the PAUSE button.
2
Press and hold down the FWD
button for a few seconds.
h
3
Each press and hold down the FWD
REV h
required speed: 1/16, 1/8, 1/2 of the normal
playback.
4
To return to normal playback, press the
PLAY button.
CD
Note for using buttons on the main unit:
Press the PAUSE button, then, press and hold down the
SKIP G / SEARCHg buttons or the SKIPH
/SEARCHh buttons on the TV/DVD/VCR for a few
seconds to begin Search in 1/16 speed of the normal
playback. Press and hold down again to change speed
to 1/8. Repeat this procedure to change to 1/2.
The Zoom function allows you to enlarge the video
image and to pan through the enlarged image.
1
Press the ZOOM button during playback.
¡
Playback will continue.
2
Press the ZOOM button repeatedly to select
the required zoom factor: ZOOM1, ZOOM2,
ZOOM3, or OFF.
3
Use the Arrow buttons (
move the zoomed picture across the
screen.
4
To exit zoom mode, press the ZOOM button
or
to OFF.
NOTES
¡ Zooming function does not work while disc menu is
shown.
¡ Zooming function is not available on some discs.
– 38 –
g
button repeatedly to select the

ZOOM

K / L /s / B
DVD-V
or REV
g or
DVD-V
) to
EN
01A11