Tv/Vcr Section; C Set Up For Use; Channel Set Up For The First Time; Deleting (Or Adding) Channel - Emerson EWC19T3, EWC27T3 Owner's Manual

You can program the tuner to scan all the channels you receive in your area.
NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just
select the TV/DVD/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3).
Then select the channel to be viewed on the Cable Box or Satellite Box.
CHANNEL SET UP FOR THE
FIRST TIME
1
Plug in the TV/DVD/VCR power
cord
Plug the TV/DVD/VCR power cord
into a standard AC outlet.
NOTE:
•
If some digits appear in the corner of
the screen, press the POWER button without
unplugging the power cord.
2
Turn on the TV/DVD/VCR
Press the POWER button to turn on the TV/DVD/VCR.
3
Select "ENGLISH" or "ESPAÑOL" or
"FRANÇAIS"
Select "ENGLISH" or
"ESPAÑOL"=Spanish or
"FRANÇAIS" =French using the
ENTER button. "[ ]" indicate the
selected language.
4
Begin auto preset
Press the Arrow button K or L to
point to "AUTO PRESET".
Then press the ENTER button.
The tuner scans and memorizes all
active channels in your area.
NOTES:
•
The TV/DVD/VCR distinguishes between standard
TV channels and cable channels.
•
If you want to play or record a video tape
BEFORE presetting the tuner, you must press the
SETUP button on the remote control. To preset the
tuner again, see "CHANNEL SET UP AGAIN" on
page 16.
•
The TV/DVD/VCR may memorize TV channels as
CATV channels if reception conditions is poor. If
this happens, try AUTO MEMO action again when
reception conditions are better.
5
After scanning
The tuner stops on the lowest memorized channel.
If you want to recall the selected channels, you can
select the desired channel directly with the remote con-
trol number buttons or the CHANNEL button K or L.
SET UP FOR USE
TV/VCR
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
1
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "CHANNEL SET UP".
Then, press the ENTER button.
2
Press the Arrow button K or L to
point to "ADD/DELETE CH".
– SET UP –
Press the ENTER button.
B LANGUAGE
[ENGLISH] ESP FRA
AUTO PRESET
3
Press the Arrow button K or L until
your desired channel number appears.
(You can also use the number buttons
– SET UP –
or the CHANNEL buttons K/L to
LANGUAGE
enter it) (Example: CH8)
[ENGLISH] ESP FRA
B AUTO PRESET
4
Press the ENTER button. The channel number changes
to light red. The channel is deleted from memory.
Added channel: Light blue.
Deleted channel: Light red.
•
To delete another channel, repeat steps [3] and [4].
•
If you press the ENTER button again, the channel
is memorized again.
•
Press the RETURN button to return to TV/VCR
SETUP MENU.
5
Press the SETUP button on the remote control to
returns to TV mode.
NOTE: To confirm that channel(s) has been deleted
or added, press the CHANNEL button K or L.
- 15 -
DELETING (OR ADDING)
CHANNEL
Select "CHANNEL SET UP"
Select "ADD/DELETE CH"
Enter the desired channel number
Delete (or add) it from (into) memory
Exit the channel setup mode

TV/VCR SECTION

TV/VCR
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
B CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– CHANNEL SET UP –
B ADD / DELETE CH (TV)
AUTO PRESET
08
ADD / DELETE
EN
1C29