Outdoor Antenna Connections - Emerson Dora the Explorer DTE351 Owner's Manual

OUTDOOR ANTENNA CONNECTIONS

OUTDOOR VHF/UHF ANTENNA CONNECTION (Antenna not included)
Follow the instructions for the type of antenna system you intend to use. If using Cable or Satellite, see page 16.
Combination VHF/UHF
Antenna (Single 75 ohm cable
or 300 ohm twin-lead wire)
Connect the 75 ohm cable from
combination VHF/UHF antenna to the
antenna jack.
OR
If your combination antenna has a 300
ohm twin-lead wire, use a 300-75 ohm
matching transformer
(NOT SUPPLIED).
Combination VHF/UHF
Antenna (Separate VHF and
UHF 300 ohm twin-leads)
Connect the UHF twin-lead wire to a
combiner . Connect
(NOT SUPPLIED)
the VHF twin-lead to a 300-75 ohm
matching transformer
(NOT
. Attach the transformer to
SUPPLIED)
the combiner. Attach the combiner to
the antenna jack.
17
Separate VHF/UHF Antennas
Connect the 75 ohm cable from the
VHF antenna and the UHF antenna
twin-lead wire to a combiner
(NOT
. Attach the combiner to
SUPPLIED)
the antenna jack.
NOTE: If your VHF antenna has a
twinlead wire use a 300-75
ohm matching transformer,
then connect the transformer
to the combiner.