Table of Contents
Advertisement
To install the RAID driver in Windows XP:
1.
During the OS installation, the system prompts you to press the <F6> key to
install third-party SCSI or RAID driver.
2.
Press <F6> then insert the floppy disk with RAID driver into the floppy disk
drive.
3.
When prompted to select the SCSI adapter to install, make sure you select
Intel(R) SATA RAID Controller (Desktop ICH9R).
4.
Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows
1.
Insert the floppy disk/USB device with RAID driver into the floppy disk drive/
USB port.
During the OS installation, select Intel ICH9R.
2.
3.
Follow the succeeding screen instructions to complete the installation.
5-42
Vista:
®
Chapter 5: Software support
Hide quick links:
Advertisement
Table of Contents
