Power-On Operations - Lexmark E330 Service Manual

4505
Accessing the configuration and diagnostic groups
Power–On operations
To access printer operations:
1. Turn off the printer.
2. Open the front cover.
3. Press and hold the buttons in the following table for the
operation needed.
Operation
Enter
configuration
menu mode
Enter
diagnostics
mode
Reset NVRAM
and enter
normal mode
4. Turn on the printer. Hold the selected button until the lights cycle
on the operator panel.
5. Close the cover and wait for the printer to activate the drive.
6. Print menus by pressing and holding
(see menu samples on
3-2
Service Manual
Power–on action
1. Power on with cover open and
pressed.
2. Close cover once the
displayed.
1. Power on with top cover open and
pressed.
2. Close cover once the
displayed.
1. Power on with top cover open and
both and
2. Close cover once the
displayed.
page 3-4 and
light is
light is
buttons pressed.
light is
until the lights flash
page 3-5).