Tertiary service error codes
Service error codes are generally non-recoverable except in an
intermittent condition when you can POR (power-on reset) the
printer to temporarily recover from the error.
Note: All service errors are initially communicated by all lights
flashing which is the primary indication or code. For brevity, this
indication is not repeated in the following codes.
1. Controller software error/illegal trap (90x)
Call the next level of support for a 900 error.
For the other errors, which indicate a faulty programming
process or faulty component on the controller card, replace the
controller card.
Diagnostic information
4505
2-31