Rear Cover Removal - Lexmark E250D - E B/W Laser Printer Service Manual

4512-220, -230

Rear cover removal

1.
Remove the right side cover. See
2.
Remove the left side cover. See
3.
Remove the two screws (A).
4.
Open the rear cover.
5.
Lift the rear cover, unhooking it from the frame at the bottom, and remove.
Note: In re-installation, check to make sure that the fuser ground cable is routed out of the way and is not
pinched or damaged.
4-6
Lexmark™ E250d and E250dn
"Right side cover removal" on page
"Left side cover removal" on page
4-5.
4-4.