Lexmark E250D - E B/W Laser Printer Service Manual page 56

4512-220, -230
Paper jam error codes (Continued)
Error
241.10
241.12
241.16
241.17
241.18
241.19
242.00
242.01
242.08
242.10
242.12
242.16
251.00
251.10
251.11
251.12
251.19
2-32
Lexmark™ E250d and E250dn
Description
Second pick attempt failed from Tray 1
Second pick from manual feeder, tray 1, or feeder failed when the media was in
the source while other sheets were committed to the paper path.
Failed to feed from tray 1. Pages in the paper path have been flushed to the output
bin.
MISIDENTIFIED SMALL GAP JAM. Engine detected small gap at the manual
feeder sensor, attempted to open the gap by stopping the feed rolls, trailing edge
was seen at the input sensor, manual feeder sensor is no longer covered.
MISIDENTIFIED NO GAP JAM. Engine detected no gap at the manual feeder
sensor, attempted to open the gap by stopping the feed rolls, trailing edge was
seen at the input sensor, manual feeder sensor is no longer covered.
Second pick attempted failed from Tray 1, no pages printed since calling a 241.10
or a prior 241.19.
Paper jam near tray 2.
Took too long to ramp up dc feed motor
Received lots of dc feed interrupts before losing them
Second pick attempt failed from Tray 2
Second pick from manual feeder, tray 1, or feeder failed when media was in the
source, other sheets were committed to the paper path.
Failed to feed from tray 2. Pages in the paper path have been flushed to the output
bin.
Paper jam near the manual feeder.
Second pick attempt failed from manual feeder.
Failed to feed from manual feeder. Pages in the paper path have been flushed to
the output bin.
Second pick from manual feeder, tray 1, or feeder failed when media was in the
source while the other sheets were committed to the paper path.
Media never reached the input sensor from the manual feeder.