contRol PanEl
1.
ON/OFF button (main power)
Press the button to turn the refrigerator on or off.
2.
AUTO/GAS mode selector button
Press the button to turn the auTO mode on or off.
3.
TEMP. SET button
The thermostat has 5 settings where
warmest and
5
the coldest temperature setting.
Press the button repeatedly until the desired setting,
e.g.
3
, is shown in the LED display. This value is
shown for about 5 seconds and then the temperature
is displayed again, e.g.
REfRigERatoR ovERviEw
1
2
3
1
indicates the
43
.
lEd diSPlay PanEl
lEd panel indications
Display is on
Display is off
The auTO
indication
dot is lit.
The auTO
and LP
indication
dots are lit.
The LP
indication
dot is lit.
Digits
E.g.
4 3
Message indications:
60
is
6
displayed.
LP
is flashing
(The message
l P
alternates
between LP
and the temperature.)
- 4 -
4 3
The LED display panel provides
a quick visual indicator of the
temperature of the food in the
fresh food cabinet, modes of
operation, status messages and
alarm conditions.
Status information
Refrigerator on
Refrigerator off
auTO mode and
aC operation
auTO mode and
Gas operation
Manual gas operation
mode.
Fresh food temperature.
Thermostat range setting
3
indication (1 - 5).
Temporary during setting.
The thermostat settings
are stored automatically
after 5 sec. of inactivity.
Temperature is above
measurement range
0
Gas operation lock out.
(Check gas.)