Remote Access - Binatone Lyris 710 User Manual

Setting up continue...
2
3
4
5
6
REMOTE
ACCESS
1
2
3
4
5
6
7
Binatone Help Line - 0845 345 9677
Press UP or DOWN button until the display
shows
RINGS TO ANSWER. RINGS TO ANSWER RINGS TO ANSWER RINGS TO ANSWER RINGS TO ANSWER
Press MENU button to confirm.
Press UP or DOWN button to select TOLL SAVER,
2, 3, 4, 5, 6, 7, 8, or 9 rings. The default setting is 5.
Use 'TOLL SAVER' when checking your Lyris 710
for messages from a remote location using long
distance service or from a pay phone. The Answering
machine responds after the 2nd ring only if you have
a new message waiting. If there are no new messages,
the phone will answer after the 4th ring. You can then
hang up after the 3rd ring to avoid paying for the call.
Press MENU button to confirm.
Continue with programming, or press EXIT
button to return to standby mode.
The REMOTE ACCESS is a three-digit code you
need if you call away from home to check
messages.The default is 321. You can change it to
any three digits you want.
Press MENU button.
The display shows OPTIONS MENU
OPTIONS MENU OPTIONS MENU OPTIONS MENU OPTIONS MENU
Press UP or DOWN button until the display
shows

REMOTE ACCESS

REMOTE ACCESS. REMOTE ACCESS REMOTE ACCESS REMOTE ACCESS
Press MENU button to confirm.
The first digit of the code will be blinking.
Press UP or DOWN button to set the first digit
of the REMOTE ACCESS code.
Press MENU button to confirm.
The second digit of the code will be blinking.
Press UP or DOWN button to set the second
digit of the REMOTE ACCESS code.
Press MENU button to confirm.
The third digit of the code will be blinking.
Calls are charged at Local Call rate.
10
your
.