10. Remote operation
You can use the Answering System features of Speakeasy 17 when you are away
from home. To protect your privacy, access is only possible if you enter the
three-digit REMOTE ACCESS Code. The base will display REMOTE While the
Speakeasy 17 is being accessed remotely.
In standby mode, press the MENU/OK button.
1
To check
your
2
Press the UP or DOWN button until the display
shows REMOTE ACCESS.
REMOTE
Press the MENU/OK button to display your code
3
ACCESS code
setting.
The default code is '321.'
4
Press the
(Note: See page 10 for how to change your code.)
To check
1
Using a tone dialling phone, dial your home
your
phone number.
messages
2
Listen to or bypass the OGM (by pressing *).
from a
Enter your REMOTE ACCESS Code.
3
remote
A list of options will be heard.
location
4
Press keypad " 2 " to playback your messages.
For other instructions, see the Remote
Intruction code menu shown on the next page.
Notes:
During remote operation, you must press a key within 10 seconds,
otherwise the machine will cut off your call.
During remote operation, the playback is paused automatically after
about
2¾
minutes, and to continue the "2" key must be pressed
within 10 seconds, or the machine will cut you off.
The following is the Remote Instruction Code
Using the
Help Menu:
remote
To bypass the Outgoing Message, press "*"
instruction
To play new messages, press "2"
codes
After playing back new messages, press "2"
again to play all recorded messages.
To pause and restart during message
playback, press "2", playback can be paused for
up to 30 seconds, but after that the playback
automatically restarts.
Binatone Help Line - 0845 345 9677
Edited by Foxit PDF Editor
Copyright (c) by Foxit Software Company, 2004
For Evaluation Only.
/
button to return to standby mode.
Calls are charged at Local Call rate.
28