Remote Access; Tam Hd On/Off Setting - Binatone Acura 3000 User Manual

Setting up continue...
REMOTE
ACCESS
1
2
3
4
5
6
7
8
9
10
TAM HD:
ON/OFF setting
Binatone Help Line - 0845 345 9677
The REMOTE ACCESS requires a three-digit code
that you need to enter if you call when away from
home to check your messages. The default is 321.
You can change it to any three digits you want.
Press the OK/MENU button.
OPTIONS MENU OPTIONS MENU
The display shows OPTIONS MENU OPTIONS MENU OPTIONS MENU
Press the UP or DOWN button until the display
shows REMOTE ACCESS

REMOTE ACCESS

REMOTE ACCESS REMOTE ACCESS REMOTE ACCESS.
Press the OK/MENU button to confirm.
The current three-digit code is shown, with the
first digit blinking.
Press the UP or DOWN button to set the first digit
of the REMOTE ACCESS code.
Press the OK/MENU button to confirm.
The second digit of the code will be blinking.
Press the UP or DOWN button to set the second
digit of the REMOTE ACCESS code.
Press the OK/MENU button to confirm.
The third digit of the code will be blinking.
Press the UP or DOWN button to set the third
digit of the REMOTE ACCESS code.
Press the OK/MENU button to confirm the new
REMOTE ACCESS code setting.
Press the / button to return to standby mode.
Two different compression rates (ON and OFF) are
provided for you to select the recording quality/
total recording time of incoming messages.
With the compression rate set to ON the recording.
quality will be higher, but it will only save up to
about 20 minutes of messages.
With the compression rate set to OFF the recording
quality will be lower, but it will save up to about 40
minutes of messages.
Calls are charged at Local Call rate.
12
.