Figure 9-10 Ftp Session Example; Table 9-3 Third Party Ftp Clients - General Fields - ZyXEL Communications Prestige 314 User Manual

P314 Broadband Sharing Gateway with 4-Port Switch
Connected to 314.x.x.x
220 P314 FTP version 1.0 ready at Thu Jan 20 18:00:02 2000
User (314.x.x.x:(none)): <Enter>
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> put p314e.bin ras
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 327680 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit
The following table describes some of the fields that you may see in third party FTP clients.
Table 9-3
Host Address Enter the address of the host server.
Login Type
This is when a user I.D. and password is automatically
supplied to the server for anonymous access. Anonymous
logins will work only if your
ISP or service administrator has enabled this option.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary
mode.
Initial Remote Specify the default remote directory (path).
Directory
Initial Local Specify the default local directory (path).
Directory
Please note that FTP over WAN will not work if you have applied a filter in Menu 11.5 to
9-10
Figure 9-10 FTP Session Example
The system reboots after a successful upload.
Third Party FTP Clients – General fields
•
Anonymous.
•
Normal.
block FTP service from the WAN.
Parameters for
Prestige
Normal
Binary
Transferring Files