Closing The Case; Replacing The Front Bezel; Replacing The Side Panel - eMachines E4264 Reference Manual

Closing the case

Replacing the front bezel

To replace the front bezel:
1
2
3

Replacing the side panel

To replace the side panel:
1
2
www.emachines.com
Slide the tabs on the right side of the bezel into the slots
on the right side of the computer.
Swing the left side of the bezel in to insert the release
tabs on the left side of the bezel into the slots on the
left side of the computer.
Press the left side of the bezel firmly until the release
tabs snap into place.
Make sure that all of the internal cables are arranged
inside the computer so they will not be pinched when
you close the computer.
Slide the side panel toward the front of the computer
until the back of the side panel is flush with the back
of the computer.
Tabs
33