Connecting Case Components - eMachines EL1358 Service Manual

Connecting Case Components

After you have installed the motherboard into a case, you can begin connecting themotherboard components.
Refer to the following:
1. Connect the CPU cooling fan cable to CPUFAN1.
2. Connect the standard power supply connector to PWR2.
3. Connect the case switches and indicator LEDs to the LEDH1.
4. Connect the auxiliary case power supply connector to PWR1.
CPUFAN1: CPU Cooling Fan Power Connector
Pin Signal Name
1 GND
2 +12V
3 Sense
4 PWM
70
Function
System ground
Power +12V
Sensor
PWM
EL1358 Service Guide