Advertisement
E e/i h
After instaJJing your air conditioner, pJug it into the proper
dectricd outRet i n the wall
1) Select Med. A/C on the Function Set knob_
2) Set the Temperature Set knob at the mid JeveJ setting. This wiJJturn on
your air con@ionen
3) You can set the thermostat from Min Cod to Max Cool Min Cod being
the warmest Max Cod being the cddest_
4) Your air conditioner has 1 or 2 Fan speeds depending on your modal
purchased and 3 A/C settings_
5) If your air conditioner has a Vent control make sure that it is on dose.
Leave it open onJy if you need to recycle the stale room dn By Jeaving it
dosed you will retain the cod air in the room_
6) Letyour air conditioner run for a few minutes before adiusting to the
desired settings.
7) Remember
the compressor of your air conditioner wiH riot work
when the temperature goes bdow 65°F.
8) AJsowhen you shut off the air conditioner wait for 3 minutes before
turning it on again. This is the compressor cycle time_
9) If you have any trouble in operating your air conditioner please refer to
the Trouble Shooting section_
Advertisement
