Advertisement
ngllsh
Wall installations:
slideooutchassis only
Note: Removethe ] or 2 shipping screws on the rear of the air conditioner
that hold the chassis to the outer shall casing_ Once removed,
these do not have to be re-installed. To ensure that your air
conditioner is properly installed in the wall, it is
recommended that it be installed by a certified technician who is
familiar with throughthe wall installations.
1) Using wood, 1_'or more in thickness, build a wooden frame to fit the
casing/cabinet dimensions of the unit which you have purchased_
2) Measure the outside width and the height of the frame to determine the
cutout dimensions necessary for the opening in the wall The depth of the
frame will depend on the depth of the wall The finished frame must be set
in the inside wall The frame has to be squared and levded. Rememberthe
frame has to be nailed securely to the wall studs. (See fig. # 11 )
wdm
fig. # 11
3) Now to install, insert the casing into the wall opening_ (Removethe
chassis out first following steps 1 - 6 in SJideoout c hassis section)_
Make sure that the cabinet is at least 1/2" inch inside the room_Also the
side JouversshouJdnot be bJocked.This is to have proper air cirdation
in
and around the compressor. (See fig. # 12)
18
Advertisement
