Advertisement
casing
level
fig. # 12
typlcaU casing
ou_ard
tip
4) The casing shouJdbe tilted 1/4" outside so as to drain the excess
dehumidified water.
5) ProperRy insulate any opening between the casing and the frame_
6) Use the screw hobs on the sides of the unit which are for the window
mounting kit and the screw holes in the top mounting kit rail to attach
the casing to the wood frame, using the 5/8" screws.
7) With the help of another person lift and put the chassisof the
air conditioner in to the casing_
8) Screw the security screw into place and snap on the grille.
9) If the fiJterwas removed during this process, reinsert the filtec
] O) Screw the two side screws that hoJdthe grille to the casing_(not in
all models)
11) Use externaJwall brackets if needed.
_
CAUTION: If, after completing these steps, the unit appears to be loose
or if you are unsure the unit is properly installed,
contact a qualified installer.
19
Advertisement
