Dansons Group GLOW BOY FGB Owner's Manual page 16

Before starting your Glow Boy Multi-Fuel install, we recommended you have the following list of tools ready.
This is not an exhaustive list, but should go along way in making your installation easier.
Power Tools
Shop Vacuum WITH Filter
Jigsaw or Reciprocating saw
Electric drill
Extension cord
4" or 5" diameter coring bit and drill
(if going through concrete)
Hand Tools
Tape Measure
Caulking Gun
Circle Maker
Allen (Key) wrench set
Stud Finder
Set of sockets or nut driver 1/4", 5/16" and
7/16"
Assortment of Phillip, Robertson and slot
screwdrivers
Assortment of sheet and wood drill bits
Flashlight
Wire stripper and wire cutter
Hammer
Bubble Level
Utility knife
Adjustable pliers (6 to 8 inches)
Small hand broom and dustpan
Furniture and Floor Protection
Supplies
Caulking tube of RTV Hi-Heat Silicone
Caulking tube of Clear Silicone
Hi–Heat Aluminum Foil Tape
2" long Wood screws (10+)
Assortment of sheet and wood screws
"Stove Bright" Hi-Heat Stove Paint
Glow Boy Pellet & Biomass
T R
T R
OOLS EQUIRED
OOLS EQUIRED
www.glowboystoves.com 16
16