TRENDnet User's Guide
Product Hardware Features
Side View
On/Off Power Switch – Push the On/Off button to turn your repeater "On" or
"Off"
WPS (Wi‐Fi Protected Setup) – Push the WPS button for 1 second to activate
WPS. The LED indicator will begin blinking green when WPS is activated.
© Copyright 2013 TRENDnet. All Rights Reserved.
Front View
LED Indicator – The LED indicator is will become solid green when your router
is connected to a router/AP and WPS connection is established successfully
o
o
o
LAN Port – Connect an Ethernet cable (also known as a network cable) from
your PC to the repeater when you want to setup the device manually, or use it
to connect to a wired PC/laptop after the unit is connected to the wireless
network
Reset Button – Use an item such as a paperclip to push and hold this button for
15 seconds and release to reset your repeater to its factory defaults.
Flashing red when booting
Flashing amber when unable to connect to a device
Flashing green when initiating WPS connection
TEW‐713RE
2