TRENDnet User's Guide
Technical Specifications
Hardware
Based on IEEE 802.11n technology, IEEE 802.11b, IEEE 802.11g
Standards
IEEE 802.3u, and IEEE 802.3
Interface
1 x 10/100 Mbps Auto‐MDIX LAN port
Green
LED Indicators
Orange
Red
Power
On / off switch
Reset button – restores factory default settings
Buttons
WPS button – enables WPS function
Power Plug
Input: 100 ~ 240 V, 0.4 A AC, 50~60 Hz
81 x 52 x 31.5 mm (3.2 x 2.0 x 1.2 in.) – Base
Dimensions
81 x 52 x 49.5 mm (3.2 x 2.0 x 1.95 in.) – With US plug
(L x W x H)
81 x 52 x 70.5 mm (3.2 x 2.0 x 2.78 in.) – With Europlug (EU)
Weight
79.4 g (2.8 oz)
Temperature
Operating: 0° ~ 40°C (32° ~ 104°F)
Humidity
Max 90% (non‐condensing)
© Copyright 2013 TRENDnet. All Rights Reserved.
Static: Repeater connect to AP successfully
Flashing: Initializing WPS
Flashing: Not able to connect to AP
Repeater is restarting
Wireless
Modulation
OFDM and CCK
Antenna
Built in antenna
2.412 ‐ 2.462GHz FCC
Frequency
2.412 – 2.472GHz ETSI
802.11n: up to 150 Mbps
Data Rate (Auto Fallback)
802.11g: up to 54 Mbps
802.11b: up to 11 Mbps
802.11b: 18 dBm (typical) @ 11 Mbps
Output Power
802.11g: 15 dBm (typical) @ 54 Mbps
802.11n: 14 dBm (typical) @ 150 Mbps
802.11b: ‐82 dBm (typical) @ 11 Mbps
Receiving Sensitivity
802.11g: ‐70 dBm (typical) @ 54 Mbps
802.11n: ‐70 dBm (typical) @ 150 Mbps
Encryption
64/128‐bit WEP, WPA / WPA2‐PSK
Channels
1‐11 (FCC), 1‐13 (ETSI)
Certifications
CE, FCC
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual
data throughput and coverage will vary depending on interference, network traffic, building
materials and other conditions.
TEW‐713RE
9