Table of Contents
Advertisement
TRENDnet User's Guide
Appendix
How to find your IP address
Note: Please note that although the following procedures provided to follow for your
operating system on configuring your network settings can be used as general
guidelines, however, it is strongly recommended that you consult your computer or
operating system manufacturer directly for assistance on the proper procedure for
configuring network settings.
Command Prompt Method
Windows 2000/XP/Vista/7/8
1. On your keyboard, press Windows Logo+R keys simultaneously to bring up the
Run dialog box.
2. In the dialog box, type cmd to bring up the command prompt.
3. In the command prompt, type ipconfig /all to display your IP address settings.
MAC OS X
1. Navigate to your Applications folder and open Utilities.
2. Double‐click on Terminal to launch the command prompt.
3. In the command prompt, type ipconfig getifaddr <en0 or en1> to display the
wired or wireless IP address settings.
Note: en0 is typically the wired Ethernet and en1 is typically the wireless Airport
interface.
Graphical Method
MAC OS 10.5‐10.8
1. From the Apple menu, select System Preferences.
2. In System Preferences, from the View menu, select Network.
3. In the Network preference window, click a network port (e.g., Ethernet,
AirPort, and modem). If you are connected, you'll see your IP address settings
under "Status:"
MAC OS 10.4
1. From the Apple menu, select Location, and then Network Preferences.
© Copyright 2013 TRENDnet. All Rights Reserved.
2. In the Network Preference window, next to "Show:" select Network Status.
You'll see your network status and your IP address settings displayed.
How to set a static IP address for your computer's Ethernet adapter
Windows 8
a.
Go to the Start menu, right‐click and select All apps on the bottom‐right corner
of the screen. Locate the Windows System tab and select Control Panel. Then
click View network status and tasks under Network and Internet.
b. Click Change Adapter Settings, right‐click the Local Area Connection icon.
c.
Then click Properties and click Internet Protocol Version 4 (TCP/IPv4).
d. Then click Use the following IP address: and enter a static IP address and
subnet mask. Then click OK.
Windows 7
a.
Go into the Control Panel, click Network and Sharing Center.
b. Click Change Adapter Settings, right‐click the Local Area Connection icon.
c.
Then click Properties and click Internet Protocol Version 4 (TCP/IPv4).
d. Then click Use the following IP address: and enter a static IP address and
subnet mask. Then click OK.
Windows Vista
a.
Go into the Control Panel, click Network and Internet.
b. Click Manage Network Connections, right‐click the Local Area Connection icon
and click Properties.
c.
Click Internet Protocol Version (TCP/IPv4) and then click Properties.
d. Then click Use the following IP address: and enter a static IP address and
subnet mask. Then click OK.
Windows XP/2000
a.
Go into the Control Panel, double‐click the Network Connections icon
b. Right‐click the Local Area Connection icon and the click Properties.
c.
Click Internet Protocol (TCP/IP) and click Properties.
d. Then click Use the following IP address: and enter a static IP address and
subnet mask. Then click OK.
MAC OS 10.4
a.
From the Apple, drop‐down list, select System Preferences.
TEW‐713RE
11
Hide quick links:
Advertisement
Table of Contents
