Sony DVD653E - PAL DVD Camcorder Service Manual page 54

5
When you have fi nished entering
characters, touch
The disc title changes to the one you
entered.
6
Touch [END].
• When you change a disc title already set
by other devices, the 21st and subsequent
characters are deleted.
Step 5: Finalizing a disc
1
Confi rm the settings you made in
steps from 2 to 4 of the "steps for
fi nalizing" on the LCD screen.
2
Touch .
3
Touch [YES]  [YES].
Finalizing starts.
• Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
adaptor during fi nalizing.
When you need to disconnect the AC
adaptor, make sure that the power of your
camcorder is set to off and disconnect the
adaptor after the CHG (charge) lamp goes
off. Finalizing restarts when you connect
the AC adaptor and turn on your camcorder
again.
You cannot remove the disc until the
fi nalizing operation is completed.
4
.
• When you made the setting to enable a creation
• You cannot view a Photomovie with the DVD-
• After fi nalizing a disc, the disc indicator and the
Touch ,when [Completed]
appears.
When using a DVD-R/DVD-RW
(VIDEO mode)/DVD+RW,
fl ashes after fi nalizing is completed
when the POWER switch is set to
(Movie) or (Still). Remove the disc
from your camcorder.
of a DVD menu on DVD-R/DVD-RW (VIDEO
mode)/DVD+RW, then fi nalize the disc, the
DVD menu appears for a few seconds while
fi nalizing the disc.
R/DVD-RW (VIDEO mode) discs on your
camcorder.
recording format are displayed as shown below:
DVD-R
DVD-RW (VIDEO mode)
DVD-RW (VR mode)
DVD+RW

47