Self-Diagnosis Display - Sony DVD653E - PAL DVD Camcorder Service Manual

1. SELF-DIAGNOSIS FUNCTION
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder, or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
Viewfinder or LCD screen
Repaired by:
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
Note: The self-diagnosis display data will be kept even if the lithium battery (BT7301 of CK-148) is removed.
3. SELF-DIAGNOSIS CODE TABLE
Self-diagnosis Code
Block Detailed
Function Code
C 0 4 0
C 1 3 0
C 1 3 0
C 2 1 0
C 3 2 5
Note: Add the sentence as follows.
If other codes are displayed, service is required.
Please send the set to a specialized center.
DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E
SELF-DIAGNOSIS FUNCTION
C : 3 1 : 1 1
Blinks at 3.2Hz
C 3 1
Block
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Symptom/State
0 Non-standard battery is used.
0 Faulty disc is used.
2 Disc access error
0 Condensation.
0 Codec IC dose not return are reply
2.

SELF-DIAGNOSIS DISPLAY

When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen consists of an alphabet and 4-digit number,
which blinks at 3.2Hz. This 5-character display indicates the
"repaired by:", "block" in which the problem occurred, and "detailed
code" of the problem.
1 1
Detailed Code
Refer to page 6.
Self-diagnosis Code Table.
Use the InfoLITHIUM battery.
Use a compatible disc with the camcorder.
Clean the disc with the supplied cleaning cloth
Use a compatible disc with the camcoder
Remove the disc, and insert it again after one hour.
Remove the power source. Reconnect it again and operate your
camcorder again
— 5 —
Correction