Sony DVD653E - PAL DVD Camcorder Service Manual page 26

Service manual
Table of Contents

Advertisement

Playback time
Approximate time (min.) available when
you use a fully charged battery pack.
For DCR-DVD92/DVD103/DVD602/DVD653
LCD screen
Battery pack
opened*
NP-FP50
105
(supplied)
NP-FP70
225
NP-FP90
400
For DCR-DVD203/DVD703
LCD screen
Battery pack
opened*
NP-FP50
90
(supplied)
NP-FP70
190
NP-FP90
345
For DCR-DVD403/DVD803
LCD screen
Battery pack
opened*
NP-FP50
90
NP-FP70
190
(supplied)
345
NP-FP90
* When the LCD backlight turns on.
On the battery pack
LCD screen
closed
125
265
475
LCD screen
closed
On the charging/recording/playback time
• Times measured with the camcorder at 25 °C
110
• Available recording and playback time will be
235
• The available recording and playback time will
415
On the AC Adaptor
LCD screen
• Use the nearby wall outlet when using the AC
closed
105
• Do not use the AC Adaptor placed in a narrow
225
• Do not short-circuit the DC plug of the AC
400
PRECAUTION
• Even if your camcorder is turned off, AC power
Before changing the battery pack, slide the
POWER switch up to OFF (CHG).
The CHG (charge) lamp fl ashes during
charging, or BATTERY INFO (p.37) will not
be correctly displayed under the following
conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is fully discharged.
(For BATTERY INFO only.)
The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC jack of your camcorder, even when the
power cord is disconnected from the wall outlet.
We recommend that you use an NP-FP70 or
NP-FP90 battery pack when a video light
(optional) is attached.
(77°F). (10-30°C (50-86°F) is recommended.)
shorter when you use your camcorder in low
temperatures.
be shorter depending on the conditions under
which you use your camcorder.
Adaptor. Disconnect the AC Adaptor from the
wall outlet immediately if any malfunction
occurs while using your camcorder.
space, such as between a wall and furniture.
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents