Cub Cadet 71 Operator's Manual page 13

HITCHING TRAILING EQUIPMENT TO THE TRACTOR
Illust. 11A
Drawbar and three-paint hitch.
(International Cub Cadet 102. 122 and 123 Tractors)
Illust. 11
Drawbar and three-point hitch shown on
International Cub Cadet 71 Tractor.
LIFT HANDLE
This handle is used to lift or lower equip-
ment used with the tractor. Depress the
release button to move the handle.
When operating equipment in the "FLOAT"
position, depress the release button on top of
the handle and move the wire bail over the top
of the button. See Illust. 118.
When the equipment is allowed to float, the
position of the lift handle forward travel can
be limited by the adjustable stop. Loosen the
nut, slide the stop to the required position,
and tighten the nut. See Illust. 118.
Refer to the equipment manual for properhitching
instructions.
Illust. 118
Adjustable stop limiting handle travel.
11