Hitachi AX-M910 Instruction Manual page 19

Video Setup Page
Component
Sets the video output according to your video
connection. This setting is not required if you are using
the VIDEO OUTPUT jack (yellow) to connect the DVD
micro system to your TV.
S-VIDEO --- Select this if you have connected the DVD
micro system to your TV using S-Video jack.
Pr/Cr Pb/Cb Y --- Select this if you have connected the
DVD micro system to your TV using Component video
jacks.
RGB --- Select this for SCART connection.
TV MODE
Selects progressive or interlace video output mode
when Pr/Cr Pb/Cb Y is selected.
In the progressive scan mode, you can enjoy the high
quality picture with less flickers. It only works when you
have connected the DVD player's Y Pb Pr jacks to your
TV that supports the progressive video input.
Otherwise, a distorted picture will appear on the TV.
QUALITY
This menu helps you to set the video quality.
SHARPNESS
Adjusts the sharpness level.
High, Medium and Low.
BRIGHTNESS
Adjusts the brightness level.
Range: -20-+20.
CONTRAST
Adjusts the contrast level.
Range: -16-+16.
GAMMA
Adjusts the gamma level.
High, Medium, Low and None.
HUE
Adjusts the hue level.
Range: -9-+9.
SATURATION
Adjusts the saturation level.
Range: -9-+9.
LUMA DELAY
Adjusts the luma delay.
0 T and 1 T.
- 18 -