Hitachi AXM949E Quick Start Manual

Quick Start Guide

AXM949E
Bluetooth Micro HI-FI System with
docking for ipad/ iphone/ ipod
Thank you
for purchasing your new Hitachi Bluetooth
Micro HI-FI System with docking for ipad/ iphone/ ipod.
Please follow this quick start guide for a successful rst
time set up.
We recommend that you spend some time reading this
instruction manual in order to fully understand all the
operational features it o ers.
Read all the safety instructions carefully before use and
keep this instruction manual for future reference.
GB
1 1
S S
Unpacking
tep tep
Remove all packaging from the unit. Retain the packaging. If you dispose
of it please do so according to any local regulations.
The Main Unit The Ampli er Speakers x2
MODE
EQ CLOCK iR
Remote Control iPhone Docking Connection Cable
1 2 3
4 5 6 0
7 8 9 PROG
PRESET
TU– TU+ – +
POP JAZZ ROCK CLASSIC
BASS
FLAT – + MUTE
VOL
MENU REPEAT
ENTER
DISPLAY SHUFFLE
DISC USB DOCK TUNER
AUX CLOCK TIMER SLEEP
INTRO RDS DIM – DIM +
Mains Cable FM Aerial AAA size batteries
x2
Instruction Manual Quick Start Guide
2 2
S S
Operating Your Remote Control
tep tep
1. Press and slide the back cover to open the battery compartment of the
remote control.
2. Insert two AAA size batteries (not included).
Make sure the (+) and (–) ends of the batteries match the (+) and (–)
ends indicated in the battery compartment.
3. Close the battery compartment cover.
3 3
S S
Connections
tep tep
Speaker
The Ampli er
L
R
CABLE FM ANT AUX
➌
CABLE
The Main Unit
➊ Connecting the Aerial
Connect one end of the aerial cable (included) to the FM socket at the rear of the unit. Then position the aerial to obtain optimum reception.
➋
Speaker Connection
Connect the speaker cables at the back of the speakers to the SPEAKER OUT (L/R) Sockets at the rear of the unit.
➌
Connecting the Control Cable
Connect the control cable between the CD player and the ampli er.
➍ Connecting to the Mains Supply
- This unit is designed to operate with an AC 230V ~50Hz power supply.
- Connecting the unit to any other power source may cause damage to the unit. Unwind the mains cable to its full length. Connect the mains
plug to a mains socket. Make sure the mains plug is fully inserted into the mains socket. The unit is now connected and ready to use.
- To switch the unit o completely, remove the mains plug from the mains socket.
4 4
S S
Clock Setting
tep tep
Auto Setting the Clock
In TUNER mode, press RDS button repeatedly until RDS CLOCK shows on
the display. Once RDS CLOCK has selected, clock will automatically update.
Manual Setting the Clock
Manual Setting the clock can only be
done in STANDBY mode.
1. In STANDBY mode, press and hold the 1 2 3
4 5 6 0
CLOCK button on the remote control
7 8 9 PROG
PRESET
until the hour digits are ashing. TU– TU+ – +
POP JAZZ ROCK
CLASSIC
2. Press the buttons on the remote
BASS
– +
FLAT MUTE
control to adjust the hour digits while
ashing, then press the ENTER or
VOL
CLOCK buttons on the remote control
MENU REPEAT
to con rm, then the minute digits will
ash. ENTER
DISPLAY SHUFFLE
ENTER
3. Press the buttons to adjust the
DISC USB DOCK TUNER
minute digits while ashing, then press
AUX CLOCK TIMER SLEEP
the ENTER or CLOCK buttons on the
INTRO RDS DIM – DIM +
CLOCK
remote control to con rm.
4. Each activated state will be cleared if
any buttons are not pressed within 15
seconds.
T T
Well done,
your new Micro HiFi System is now ready to use.
ip: ip:
You will nd that there are many exciting features available. To get to know all these features, please take some time to
read the Instruction Manual provided with your Bluetooth Micro HiFi System.
Speaker
To the
Mains Socket
➋
➍
L
R
AC~
SPEAKER OUT
➊
5 5
S S
Basic Operation
tep tep
Switching the Unit On
When you rst connect the unit to the mains socket. The unit will be in
STANDBY mode and the STANDBY button will be red.
1. Press the STANDBY button on the unit or the remote control to switch
the unit on.The word "HELLO" will show in the display.
2. Press the STANDBY button on the unit or the remote control to switch
the unit back to standby mode. The STANDBY button will light up red.
3. Disconnect the mains plug from the mains socket if you want to switch
the unit o completely.
Selecting Modes
Turn the FUNCTION dial on the unit to switch between USB, TUNER,
DOCK, AUX, BT and DISC modes. The selected mode will show on the
display. Alternatively press the USB, TUNER, DOCK/BT, AUX or DISC
button on the remote control to select desired mode.
QSG-AXM950E-121012V2