Hitachi AX-M910 Instruction Manual page 18

General Setup Page
Audio Setup Page
TV Display
NORMAL/PS --- When selecting this mode, wide
picture displayed on the screen will be cut automatically.
NORMAL/LB --- When selecting this mode, wide
picture displayed on the screen will have black top and
bottom area.
WIDE --- If this system connects wide screen TV,
selecting this mode.
OSD Language
This menu allows the user to select the language for
the on-screen display.
Screen Saver
Set the screen saver to activate or cancel.
Downmix
This option allows you to set the stereo analog output
of your DVD Player.
LT/RT --- Select this option if your DVD Player is
connected to a Dolby Pro Logic decoder.
STEREO --- Select this option when output delivers
sound from only the two front speakers.
3D SURROUND --- Allows the DVD player to use virtual
surround sound effects.
SPDIF Output
You can choose output mode when playing different
disc.
OFF --- Turns off the SPDIF output.
SPDIF/RAW --- If you have connected your DIGITAL OUT
(COAXIAL) to a multi-channel decoder/receiver.
SPDIF/PCM --- Only if your receiver is not capable of
decoding multi-channel audio.
DUAL MONO
Select the setting for audio output.
STEREO --- Left mono sound will send output signal to
Left speaker and Right mono sound will send output
signal to Right speaker.
L-MONO --- Left mono sound will send output signal to
Left speaker and Right speaker.
R-MONO --- Right mono sound will send output signal
to Left speaker and Right speaker.
Reverb Mode
Reverb mode provides a virtual surround sound
experience using just two speakers.
HDCD
Set the audio output cutoff frequency point when
playing an HDCD disc.
- 17 -