Temporarily Blanking The Screen - Hitachi CP-WUX645N Operating Manual

Operating

Temporarily blanking the screen

1.
Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in SCREEN
42).
Menu (
To exit from the blank screen and return to the input signal
screen, press the BLANK button again.
● The projector automatically exits from the BLANK mode when some control
buttons are pressed.
CAUTION
on, use the BLANK function above. Any other method of blocking the projection
light, such as attaching something to the lens or placing something in front of the
lens, may cause the damage to the projector.
• The sound is not connected with the blank screen function. If necessary,
NOTE
set the volume or mute rst.
►If you wish to have a blank screen while the projector's lamp is
24
MY SOURCE/
DOC.CAMERA
SEARCH
BLANK LASER