Projector Control - Hitachi CP-WUX645N Operating Manual

3. Management with Web browser software
3.1 Conguring and controlling the projector via a web browser (continued)

3.1.10 Projector Control

• The setting value may not match with the actual value if the user
NOTE
changes the value manually. In that case, please refresh the page by clicking
[Refresh] button.
Controls the projector.
Item
Main
Power
Input Source
Picture Mode
Blank On/Off
Mute
Freeze
Magnify
Template
P by P
P by P Left Source
P by P Right Source
P by P Main Area
MY Image
MY Image Delete
The items shown in the table below can be
performed using the Projector Control menu.
Select an item using the up and down arrow keys
on the PC.
Most of the items have a submenu. Refer to the
table below for details.
Turns the power on/off.
Selects the input source.
Selects the picture mode setting.
Turns Blank on/off.
Turns Mute on/off.
Turns Freeze on/off.
Controls the magnify setting.
In some input signal sources, it might stop "Magnify" even
though it does not reach to maximum setting value.
Turns template on/off.
Turns the P by P on/off.
Selects the P by P Left Source setting.
Selects the P by P Right Source setting.
Selects the P by P Main Area Source setting.
Select MY IMAGE data.
Delete MY IMAGE data.
26
Description