Port Settings - Hitachi CP-WUX645N Operating Manual

3. Management with Web browser software
3.1 Conguring and controlling the projector via a web browser (continued)

3.1.4 Port Settings

Displays and congures communication port settings.
Item
Network Control Port1
(Port:23)
Port open
Authentication
Network Control Port2
(Port:9715)
Port open
Authentication
Image Transfer Port
(Port:9716)
Port open
Authentication
SNMP Port
Port open
Trap address
SMTP Port
Port open
Click [Apply] button to save the settings.
• The new conguration settings are activated after restarting the
NOTE
network connection. When the conguration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
Congures command control port 1 (Port:23).
Click [Enable] check box to use port 23.
Click [Enable] check box when authentication is required for
this port.
Congures command control port 2 (Port:9715).
Click [Enable] check box to use port 9715.
Click [Enable] check box when authentication is required for
this port.
Congures the image transfer port (Port:9716).
Click the [Enable] check box to use port 9716.
Click the [Enable] check box when authentication is required
for this port.
Congures the SNMP port.
Click [Enable] check box to use SNMP.
Congures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings. The maximum length of host or domain name is up
to 255 characters.
Congures the SMTP port.
Click [Enable] check box to use the e-mail function.
16
Description