Epson WorkForce AL-M400DN User Manual page 193

1. Open the System Preferences, and then double-click the Print & Fax ("Print & Scan" for Mac OS X
10.8 or 10.7) icon.
The Print & Fax ("Print & Scan" for Mac OS X 10.8 or 10.7) window appears.
2. Click in the Printers window.
3. Select the protocol or the interface that you are using from the pop-up list.
Note for IP Printing users:
❏ Make sure to select IP Printing. Do not select EPSON TCP/IP, because it cannot be used with the
PostScript 3 printer driver.
❏ After selecting IP Printing, enter the IP address for the printer, then make sure to select the Use
default queue on server check box.
Note for USB users:
Make sure to select USB. Do not select EPSON USB, because it cannot be used with the PostScript 3
printer driver.
4. Follow the instructions as appropriate below to select your printer.
IP Printing
Select Epson from the Name List, then select your printer from the Printer Model List.
USB
Select your printer from the Name List, then select your printer from the Printer Model List.
Bonjour
Select your printer, the printer name is followed by (PostScript), from the Name List. Your
printer model is automatically selected in the Printer Model List.
Note for Bonjour users:
If your printer model is not automatically selected in the Printer Model list, you need to reinstall the
PostScript printer driver. See "Installing the PostScript printer driver" on page 192.
5. Click Add.
Note for IP Printing users, USB or Bonjour users:
Select your printer from the Printers, then select Options & Supplies. The printer information
dialog box appears, then make the necessary settings.
AL-M300/AL-M400 Series
About the Printer Software
User's Guide
193