Emerson Research iC200 Owner's Manual page 45

4.) Depress the Month/date button. The display will change from ' time' to ' month/
date' (mm/dd).
While holding the Month/date button, press the Tuning/Skip
the display to the correct Month and Date. The Day indicator will change
automatically as you adjust the month/date settings. When the correct Month
and Date appear on the display, release the buttons.
5.) Depress the Time button and the Tuning/Skip
the correct Time. Be sure to confirm that you have set the time correctly to
' AM' or ' PM' by observing the AM indicator.
6.) After you set the time, reconfirm that the Day, and Month/Date displays are still
correct. Make final adjustments if necessary.
®
The SmartSet clock memory is now reset and the new lithium battery will maintain
it for the next 5 to 8 years, depending on the number and duration of the power
outages you experience.
IMPORTANT NOTE:
After resetting the clock, don' t forget to reset your wake up times, and alarm
mode settings, and sleep timer settings as well.
iC200_NCab050307.p65
44
44
button to set
button to set the display to
3/5/2007, 11:29