Wake To Your Ipod - Emerson Research iC200 Owner's Manual

Wake To Your iPod

NOTE: You can only wake to the "Dockable" iPod
®
iPod Shuffle.
1.) Connect your iPod
song that you would like to play at the wake up time and the desired volume
level, then press the
2.) Slide the Alarm 1 and/or
Alarm 2 selector switches,
located on the left side panel
to the iPod position.
The AL 1 and/or AL 2 indicators will appear in the main display to confirm that
the alarms are ' On' .
3.) At the selected wake up time the system will turn on in the iPod
song you selected.
NOTE: If you selected the song from the iPod
stop when that song ends. If you selected the song from within the iPod
Album menu, playback will continue for one hour or until the end of that
Album, whichever comes first.
4.) To stop the iPod
Alarm 1 or Alarm 2 buttons on the top panel.
NOTES:
• If you selected the "Wake To iPod
to the docking station at the wake up time, the alarm automatically defaults
to the "Wake To Buzzer" option.
• You cannot wake to an iPod
to receive the alarm signal from this system. If you selected the "Wake To
® "
iPod option but you are using an iPod
default to the "Wake To Buzzer" mode.
iC200_NCab050307.p65
®
®
to the docking station as usual, start playback, select the
Power button to shut the system ' Off' .
®
alarm sooner press the
® " option but there is no iPod
®
Shuffle because the Shuffle has no interface
34
34
® . You cannot wake to the
®
Songs menu, playback will
Power button or the appropriate
®
Shuffle, the alarm will automatically
3/5/2007, 11:29
®
mode to the
®
® connected