Installing A Media Tray - IBM 87401RU Installation And User Manual

Installing a media tray

To install a media tray, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Make sure that the media tray release lever is in the open position and the
3. Slide the media tray into position until it stops and locks into place.
4. Rotate the media tray release lever to the closed position.
Media tray
on page 26.
CompactFlash release buttons are pushed into the in position.
Media tray
Chapter 3. Installing the BladeCenter HT unit and options
CompactFlash
release button
57