Table of Contents
Advertisement
7. If you have other modules to install at the front of the unit, do so now.
Removing and installing the media tray
The media tray is a hot-swap unit that is installed in the front of the BladeCenter T
unit and contains the system-status panel, two USB connectors, and the CD-ROM
drive. See "Media tray" on page 9 for information about the system-status panel
controls and indicators.
CD-ROM drive
Use the instructions in this section to remove or install the media tray at the front
of the BladeCenter T unit.
46
BladeCenter T Type 8267: Hardware Maintenance Manual and Troubleshooting Guide
v The output power LED is lit.
v The error LED is not lit.
Otherwise reinstall the bezel assembly at the front of the BladeCenter T unit.
Media tray
System-status panel
USB connectors
Advertisement
Table of Contents
