Specifying Options That Appear On The User Options Web Pages - Cisco 6921 - Unified IP Phone Standard VoIP Administration Manual

Chapter 5 Configuring Features, Templates, Services, and Users
•
For additional information, refer to:
•
•

Specifying Options that Appear on the User Options Web Pages

Most options that are on the User Options web pages appear by default. However, the following options
must be set by the system administrator by using Enterprise Parameters Configuration settings in Cisco
Unified Communications Manager Administration:
•
•
•
The settings apply to all User Options web pages at your site.
Note
To specify the options that appear on the User Options web pages, follow these steps:
Procedure
From Cisco Unified Communications Manager Administration, choose System > Enterprise
Step 1
Parameters.
The Enterprise Parameters Configuration window appears.
In the CCMUser Parameters area, specify whether a parameter appears on the User Options web pages
Step 2
by choosing one of these values from the Parameter Value drop-down list box for the parameter:
•
•
•
•
•
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
http://<server_name:portnumber>/ccmuser/, where server_name is the host name of the
Cisco Unified Communications Manager.
A user ID and default password are needed to access the application.
These settings correspond to the values you entered when you added the user to Cisco Unified
Communications Manager (see the
section on page 5-19).
Cisco Unified Communications Manager Administration Guide,
chapter.
Cisco Unified Communications Manager Administration Guide,
Show Ring Settings
Show Line Text Label Settings
Show Call Forwarding
True—Option displays on the User Options web pages (default except for Show Ring Settings,
Show Line Text Label, and Show Call Forwarding).
False—Option does not display on the User Options web pages.
Show All Settings—All call forward settings display on the User Options web pages (default).
Hide All Settings—No call forward settings display on the User Options web pages.
Show Only Call Forward All—Only call forward all calls displays on the User Options web pages.
"Adding Users to Cisco Unified Communications Manager"
Managing the User Options Web Pages
"User Group Configuration"
"End User Configuration" chapter.
5-21