Device Logs - Cisco 6921 - Unified IP Phone Standard VoIP Administration Manual

Device Logs

Table 8-3 Ethernet Information Items
Item
Tx Frames
Tx broadcast
Tx unicast
Rx Frames
Rx broadcast
Rx unicast
Table 8-4 Access Area and Network Items
Item
Tx Frames
Tx broadcast
Tx Unicast
Rx Frames
Rx broadcast
Rx unicast
CDP Neighbor Device ID
CDP Neighbor IP Address
CDP Neighbor Port
Port Information
IPv4
Device Logs
The following device logs hyperlinks on a phone's web page provide information you can use to help
monitor and troubleshoot the phone. To access a device log area, access the web page for the phone as
described in the
•
•
•
•
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
8-8
Description
Total number of packets transmitted by the phone
Total number of broadcast packets transmitted by the phone
Total number of unicast packets transmitted by the phone
Total number of packets received by the phone
Total number of broadcast packets received by the phone
Total number of unicast packets received by the phone
Description
Total number of packets transmitted by the phone
Total number of broadcast packets transmitted by the phone
Total number of unicast packets transmitted by the phone
Total number of packets received by the phone
Total number of broadcast packets received by the phone
Total number of unicast packets received by the phone
Identifier of a device connected to this port discovered by CDP protocol.
IP address of the neighbor device discovered by CDP protocol.
Neighbor device port to which the phone is connected discovered by CDP protocol.
Speed and duplex information.
Information on the DHCP status.
"Accessing the Web Page for a Phone" section on page
Console Logs—Includes hyperlinks to individual log files. The console log files include debug and
error messages received on the phone.
Core Dumps—Includes hyperlinks to individual dump files. The core dump files include data from
a phone crash.
Status Messages—Displays up to the 10 most recent status messages that the phone has generated
since it was last powered up. You can also see this information from the Status Messages screen on
the phone. Table 7-2 describes the status messages that can appear.
Debug Display—Displays debug messages that might be useful to Cisco TAC if you require
assistance with troubleshooting.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
8-2.
OL-19025-01