Picture-2 Menu - Hitachi CPS210W User Manual

Multifunctional Settings (continued)
PICTURE - 2 Menu
With the PICTURE 2 menu, the items shown in the table below can
be performed.
Perform each operation in accordance with the instructions in the
table below.
Item
V POSITION
H POSITION
H PHASE
H SIZE
OVER SCAN
RESET
26
Adjust the Vertical Position: Up
• This item can be selected only at a RGB input.
Adjust the Horizontal Position: Left
• This item can be selected only at a RGB input.
Adjust the Horizontal Phase (to eliminate flicker) :
Right Left
• This item can be selected only at a RGB input or a COMPONENT VIDEO
input.
Adjust the Horizontal Size: Large
• When this adjustment is excessive, the picture may not be displayed
correctly. In such a case, please press the RESET button during selection of
this item to reset the H SIZE.
• This item can be selected only at a RGB input.
Adjust the Over-scan Ratio:
Large Small
• This item can be selected only at a VIDEO input, a S-VIDEO input or a
COMPONENT VIDEO input.
• When this adjustment is too large, a certain degradation may appear at the
frame area of the picture. In such a case, please adjust small.
Reset the PICTURE-2 Menu Items:
Selecting the EXECUTE performs this function.
EXECUTE CANCEL
• The items of the PICTURE-2 menu are collectively returned to the initial
setting. Note that the H PHASE item is not reset.
Description
Down
Right
Small
MENU
MAIN
V POSITION 20
PICTURE-1 H POSITION 142
PICTURE-2 H PHASE 31
INPUT H SIZE 1344
AUTO OVER SCAN 95
SCREEN
RESET
OPTION
: SELECT