Hitachi CPS210W User Manual page 62

See the top of the projector. You can see the control buttons.
POWER indicator
tells the state of power
supply. Refer to the section
"Turning On/Off Power".
INPUT button
toggles between
the signal ports.
RGB VIDEO
S-VIDEO
COMPONENT VIDEO
CAUTION Always handle the batteries with care and use them only as directed.
Improper use may result in battery cracking or leakage, which could result in fire,
injury and/or polution of the surrounding environment.
• Keep the battery away from children and pets.
• Be sure to use only the batteries specified for use with the remote control. Do not mix
new batteries with used ones.
• When inserting batteries, verify that the plus and minus terminals are aligned correctly
(as indicated in the remote control).
• When you dispose the battery, you should obey the law in the relative area or country.
Remove the
1
battery cover.
Slide back and
remove the battery
cover in the direction
of the arrow.
TEMP indicator
lights or blinks when any
problem about internal
temperature has happened.
POWER
STANDBY/ON INPUT
STANDBY/ON button
prepares for turning the power on/off. Refer
to the section "Turning On/Off Power".
Insert the batteries.
2
Align and insert the two
AA batteries according to
their plus and minus
terminals (as indicated in
the remote control).
LAMP indicator
lights or blinks when any
problem about the lamp has
happened.
TEMP
LAMP
MENU
MENU buttons
operate the menu function.
Close the battery
3
cover.
Replace the battery
cover in the direction
of the arrow and
snap it back into
place.
5