Input Menu - Hitachi CPS210W User Manual

Multifunctional Settings (continued)

INPUT Menu

With the INPUT menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Item
Select a Color Space Mode:
AUTO
• This item can be selected only at a RGB input or a COMPONENT VIDEO
COLOR SPACE input.
• When the AUTO is selected, the optimum mode is automatically selected.
However, it may not work well at some signals. In such a case, select the
SMPTE240 or REC709 for HDTV signal.
Select a Function of COMPONENT VIDEO Jacks:
COMPONENT • When the SCART RGB is selected, the COMPONENT VIDEO jacks function
as ports for a RGB input with a SCART cable. Refer to the section "Signal
Connector Pin Assignment" of "TECHNICAL".
Select a Signal Type Mode:
• This item performs only at a VIDEO input or a S-VIDEO input. For a
COMPONENT VIDEO input, although this item is ineffective, the signal type is
identified automatically even if the AUTO is not selected. For HDTV signals,
VIDEO
refer to the HDTV item below.
• Selecting the AUTO automatically selects the optimum mode. However, it
may not work well at a PAL60 signal and some other signals. If the picture
becomes unstable (ex. a irregular picture, color lack), please select the mode
depending on the input signal.
• The AUTO operation requires approximately 10 seconds.
Select the Frame Lock Mode:
• This function performs only at a RGB input with vertical frequency of 48 to 72
Hz.
FRAME LOCK
• When the TURN ON is selected, a moving picture is displayed more
smoothly.
• This function may cause a certain degradation of the picture. In such a case,
please select the TURN OFF.
Select a 3D-YCS mode:
• This function performs only at a VIDEO input of NTSC 3.58.
3D-YCS • NORMAL is the mode for images with a lot of motions like movies, and STILL
IMAGE is the mode for images with few motions or completely still ones like
slides.
• When this function performs, the VIDEO NR function is ineffective.
RGB
COMPONENT
AUTO NTSC
NTSC 4.43
TURN ON
STILL IMAGE
Description
SMPTE240
SCART RGB
PAL
M-PAL
TURN OFF
NORMAL
MENU
MAIN
COLOR SPACE
PICTURE-1 COMPONENT
PICTURE-2 VIDEO
INPUT
FRAME LOCK
AUTO 3D-YCS
SCREEN
VIDEO NR
OPTION PROGRESSIVE
INFORMATION
: SELECT
REC709 REC601
SECAM
N-PAL
TURN OFF
AUTO
COMPONENT
AUTO
TURN ON
NORMAL
LOW
TURN OFF
27