Electrical Requirements - KitchenAid KSM7581BZ Use & Care Manual

Stand Mixer Safety

Electrical Requirements

Proof of Purchase & Product Registration
Always keep a copy of the itemized sales receipt showing the date of purchase of your
Stand Mixer. Proof of purchase will assure you of in-warranty service. Before you use
your Stand Mixer, please fill out and mail your product registration card packed with
the unit. This card will enable us to contact you in the unlikely event of a product safety
notification and assist us in complying with the provisions of the Consumer Product
Safety Act. This card does not verify your warranty. Please complete the following
for your personal records:
Model Number ________________________________________________________
Serial Number ________________________________________________________
Date Purchased _______________________________________________________
Store Name __________________________________________________________
Volts: 120 A.C.
Hertz: 60 Hz
NOTE: The power rating for your Stand
Mixer is printed on the serial plate.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or serviceman install an outlet
near the appliance.
The maximum rating is based on the
attachment that draws the greatest load
(power). Other recommended attachments
may draw significantly less power.
5