Clarion VRX653R Owner's Manual & Installation Manual page 51

I Sample System 2
Main Unit
(VRX653R)
Mini DIN(8P) Cable
(included the
NAX943DV)
RGB cable
(included the
NAX943DV)
Navigation System
(NAX943DV)
∗To enable the correct input, it is
necessary to configure the VRX653R
as described on page 37.
∗The rear monitor displays TV/VTR
images only. Images from the DVD
changer cannot be displayed.
CD Changer
(CDC655z/655Tz/1255z/
DCZ628)
∗When two CD changers are
connected, CCA-519-601 is
required.
Amp remote
RCA PIN cable
(Sold separately)
DVD/etc. INPUT
VIDEO INPUT
CeNET cable
(included the
TV tuner)
RDS TMS Tuner
(TMH943)
CeNET Y-adapter
(CCA-519-601,
sold separately)
Amp.
RCA video cable
(included the VCZ628)
RCA video cable
(included
the TV tuner)
TV Tuner
RCA video cable (sold separately)
(TTX7502z/
TTX7503z)
CeNET Cable
(included the DAB tuner)
RDI OUT DAB Tuner
(DAH913/
DAH923)
CeNET Cable
(included the Changer)
Ferrite clamp
(Included the DVD changer)
Set the [CeNET/STAND ALONE]
switch to the [CeNET] position.
CeNET
Front
Speakers
Rear
Speakers
Rear
Monitor
AV Adapter cable
(CCA-389, sold separately)
VTR
DVD Changer
(VCZ628)
STAND
ALONE
VRX653R
53