Digital Radio/Dab Operations - Clarion VRX653R Owner's Manual & Installation Manual

TV Operations
Changing over TV display size
∗ This function is available only when the panel is
open.
1. Press the DISP button @ for 1 second or
longer to display playback information such
as screen size.
2. Each time you press the DISP button @ for
1 second or longer to change over the TV
display size, the TV display size changes in
the following order:
"NORMAL" ➜ "WIDE" ➜ "F. WIDE" ➜
"CINEMA" ➜ "NORMAL"
G "NORMAL": (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
G "WIDE": (wide mode)
NTSC: The image at right and left ends in a
display elongates horizontally.
PAL: The image may be slightly cut off at
the top and bottom of the screen.
G "F. WIDE": (full wide mode)
The whole image elongates horizontally.
G "CINEMA": (cinema mode)
The image at both top and bottom in a
display disappears.
Notes:
• When a normal 4:3 size image, not being a wide
one, is viewed by displaying it fully on a wide TV
display in a wide mode or a full-wide mode, a
part of the peripheral image will be lacking or
deformed. In deference to the intention of
producer, an original image can be viewed in a
normal mode.
• During superimposed display, it becomes a full-
wide mode.
• In the DVD changer, when the monitor display
size is set in the CINEMA and WIDE (PAL)
modes, a part of playback display such as play
time may not be shown depending on the play
disc.
In this case, change the monitor display size to a
mode other than the CINEMA and WIDE (PAL)
modes.
32
VRX653R
Digital Radio/DAB
Operations
About DAB programmes
The Digital Audio Broadcasting (hereinafter
referred to as "DAB") system transmits several
programmes on one frequency simultaneously,
by compressing audio signals.
∗ The group of programmes, which is transmitted
on a single frequency is called "ensemble".
∗ Some DAB stations have several ensembles
and broadcast diversified programmes.
∗ The number of programmes and the contents
which an ensemble provides depend on the
broadcast stations and times. Since DAB
programmes are broadcast on several different
frequencies, the same programme can be
enjoyed over large areas.
G A DAB station has multiple programmes on
one frequency.
G When you turn the unit on and select DAB
mode, the programme that starts is the one
that was selected before when the power was
turned off. If this programme is not available,
another programme is selected automatically.
G Programmes have their own names, just like
PS on RDS.
Note:
• For sophisticated audio quality, the receiver
needs to tune on a DAB Ensemble. While the
receiver is being tuned in to the DAB Ensemble,
the Audio outputs are muted. The tuning time is
not fixed.
Listening to the DAB
1. Press the FNC button 1 and select the
DAB mode.
2. Press the right or left side of the SEARCH
button 2 to tune in the desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
1. Press the FNC button 1 to select DAB
mode.
2. Press and hold right or left for 1 second or
longer using the SEARCH button 2.
∗ The unit stops the seek tuning when it cannot
find a DAB station. The display returns to the
previous mode.