Clarion DXZ865MP Owner's Manual page 25

Note:
When "1", "2", "3", or "USER" is selected for ADF
(Anti Distortion Filter), setting of MAGNA BASS EX
cannot be performed.
Adjusting the sub-woofer
• "SW VOLUME" (sub-woofer) can be adjusted
only when the "SUB-WOOFER" is set to "ON"
(cf. page 32).
• The factory default setting for SW VOLUME is
"0".
1. Press the [SOUND] button.
2. Touch [SW VOLUME].
SW VOLUME
3. Touch on the right of the display and
adjust the item as desired.
∗ This item can be adjusted within the range
-5 to +5.
4. Press the [SOUND] button to return to the
original mode.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can only be performed when
the ADF (Anti Distortion Filter) is set to "OFF".
1. Press the [SOUND] button.
2. Touch [BASS].
3. Touch on the left of the display to
select the item.
Each touch of
adjustment items as follows:
GAIN ➜ FREQUENCY ➜ Q ➜ GAIN...
4. Touch on the right of the display to
adjust the setting.
∗ The factory default setting for "GAIN" is
"0". (Adjustment range: -6 to +8)
∗ The factory default setting for
"FREQUENCY" is "50". (Adjustment 50/
80/120Hz)
∗ The factory default setting for "Q" is "1".
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[SOUND] button to return to the original
mode.
0
RTN
switches the
Adjusting the treble (Gain,
Frequency)
This adjustment can only be performed when
the ADF (Anti Distortion Filter) is set to "OFF".
1. Press the [SOUND] button.
2. Touch [TREBLE].
3. Touch on the left of the display to
select the item.
Each touch of
adjustment items as follows:
GAIN ➜ FREQUENCY ➜ GAIN...
4. Touch on the right of the display to
adjust the setting.
∗ The factory default setting for "GAIN" is
"0". (Adjustment range: -6 to +6)
∗ The factory default setting for
"FREQUENCY" is "12k". (Adjustment
8kHz/12kHz)
5. When the adjustment is complete, press the
[SOUND] button to return to the original
mode.
Adjusting balance/fader
BALANCE:
Adjusts the volume balance between the left
and right speakers.
FADER:
Adjusts the volume balance between the front
and rear speakers.
• The factory default setting for BALANCE is
"0" and for FADER is "0".
1. Press the [SOUND] button.
2. Touch [BALANCE] or [FADER].
BALANCE
3. Touch on the right of the display and
adjust the item as desired.
∗ "BALANCE" can be adjusted within the
range L13 (left side emphasized) and R13
(right side emphasized).
∗ "FADER" can be adjusted within the range
R12 (rear side emphasized) and F12 (front
side emphasized).
4. Press the [SOUND] button to return to the
original mode.
Sound Adjustment
switches the
0
RTN
25
DXZ865MP