Remote Control; Inserting The Battery - Clarion DXZ865MP Owner's Manual

6. REMOTE CONTROL

Remote control unit

Inserting the Battery

1. Turn over the remote control unit and slide the
cover in the direction indicated by the arrow in the
illustration.
2. Insert the battery (CR2025) into the insertion
guides, with the printed side (+) facing upwards.
3. Press the battery in the direction indicated by the
arrow so that it slides into the compartment.
4. Replace the cover and slide in until it clicks into
place.
Notes:
Misuse may result in rupture of the battery, producing
leakage of fluid and resulting in personal injury or damage
to surrounding materials. Always follow these safety
precautions:
• Use only the designated battery .
• When replacing the battery, insert properly, with +/-
polarities oriented correctly.
• Do not subject battery to heat, or dispose of in fire or
water. Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
[ SRC ]
[ ], [ ]
[ MUTE ]
[ ISR ]
[ SCN ]
Receiver for remote control unit
Operating range : 30° in all directions
Signal transmitter
[ BND ]
[ ]
[ a ], [ d ]
[ DISP ]
[ RDM ]
[ RPT ]
1
Insertion guide
2
3
11
DXZ865MP