Advertisement
Product Specification:
Receiver Socket:
HE-205: Bulb Holder
Input: 230V ~ 50Hz
Max Load: 100W (Incandescent)
Frequency: 433.92MHz
Indoor Use Only
Switching On/Off :
1. Select the unit by
2. Press the "On"
pressing the "unit"
button, the receiver
button until the
socket will switch on.
correct number is
Never exceed the
displayed on the
maximum load.
screen.
3. Press the "Off" button to switch the receiver unit off.
Setting Clock
The remote control displays the time in a 24hr format, to set the time.
1. Press and hold the
2. Use the
clock button for +3sec.
buttons to select
The hrs will now start
the hours and
to flash
press Enter.
3. The minutes will now start to flash, set using the up and
down arrows and press
Setting Timer :
The HE-200 remote control timer can store unto 12 different timer
programs, ideal for switching on lights thought the home for added
security.
To program the remote control:
1. Press and hold the "Timer" button for 3 seconds, the
display will show the 12 available memory spaces. Use
the arrows keys to select a memory space, the display
will also show any programmed times already saved.
Press "Enter" to select the program space.
2. Press and hold the "Timer" button for 3 seconds, the
display will show the 12 available memory spaces. Use
the arrows keys to select a memory space, the display
will also show any programmed times already saved.
Press "Enter" to select the program space.
3. The start or On time will start to flash, use the arrows keys to select the hours
and press enter to select the min.
Now select the finish or off time.
4. Finally select the program mode using the arrows keys and press enter to
confirm.
Daily Timer Setting: Activates the program daily
Security Setting: Selecting the security mode will switch the
receiver units "On/Off" randomly through out the set time.
On = between 40Min - 2Hrs
Off = between 40Min - 3Hrs
Single Timer: Activates the program for a single time only.
Help Section :
Help: Occasionally interference from receiver sockets plugged into adjacent wall
sockets or when used with transformers (low voltage products) can affect the
operating range.
Try placing one of the receiver sockets in another wall socket. For low voltage
products, place the transformer as far away form the receiver socket as possible.
RF Range:
The radio signals operating distance is reduced when the signal has
to pass through walls. The radio signals achieve a range of 30m inside a building;
this can be reduced depending on the type of material
Range
Reduction Guide:
M ET AL
90%
Contact:
Helpline: 0845 2301 231
Contact Details:
C H Byron
Tel: 0845 2301231
34, Sherwood Rd
Fax: 01527 557701
Aston Fields
Web: www.chbyron.com
Bromsgrove
E-mail:
B60 3DR
support@chbyron.com
BRIC K
PLASTIC S
10 - 40%
10 - 15%
GLASS
TIM BER
C O NC RETE
5 - 15%
10 - 40%
40- 80%
433MHz
0560
R&TTE
APPROVED
A
IRL
UK
M
B
I
BG
N
DK
L
CZ
SK
FIN
NL
EST
SLO
F
P
H
CH
D
E
IS
PL
GR
S
LV
RO
LT
CH Byron Electrical United Kingdom. www.chbyron.com
Advertisement
