Advertisement
The HE-302 Socket is a expansion unit for the HomeEasy range of products and is designed to work with all HomeEasy products.
Up to Six remote control units can be paired with each Receiver Socket or Module. To program a socket insert the unit into a plug socket and switch on the power, now press the "Learn" button. The LED will start to flash, now press the selected "On" button on the remote control, the LED will stop flashing. The units are now paired together, you can test this by pressing the selected "On/Off" button.
Always refer to the original instructions when using with additional products.
To delete a remote control that has been paired with a HE-302 receiver socket, simply press the "Learn" button. The LED will start to blink; press the "Off" button on the remote control, the LED will blink twice to confirm that the remote control has been removed from the receiver sockets memory.
To delete all the remote control units from the memory of the receiver socket, hold the "Learn" button for more than 6 seconds, the LED will start to blink continuously. Press a the "Learn" button again, the LED will blink twice to confirm that all paired remote controls have been deleted from the receiver sockets memory.
Remote Control: HE-302
Input: 230V ~50Hz
Range: 30 Metres (Open Distance)
Frequency: 433.92MHz
Max Load: 3000W (Resistive)
Indoor Use Only
Never Exceed the Product Specification
Contact:
C H Byron 34, Sherwood Rd
Aston Fields Bromsgrove B60 3DR
Helpline: 0845 2301 231
Tel: 0845 2301231
Fax: 01527 557701
Web: www.chbyron.com
E-mail: support@chbyron.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Byron Home Easy HE-302 - Additional Remote Socket Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Home Easy HE-302 that isn't answered in the manual? Leave your question here.