Symantec 10551441 - AntiVirus Corporate Edition Installation Manual page 147

Table 7-3 InstallOptions switches
Switch
/v
The parameters in the Start.htm file contain information about the Web server
and the locations of the files that need to be installed. The configuration
parameters in Table 7-4
the <object> tags.
Table 7-4 Start.htm parameters and values
Parameter
ServerName
VirtualHomeDirectory
ConfigFile
ProductFolderName
MinDiskSpaceInMB
ProductAbbreviation
Deploying installation packages using Web-based deployment
Description
Set the level of logging verboseness. The valid values are 0, 1,
and 2.
are located near the bottom of the Start.htm file, inside
Value
The name of the server that contains the installation source
files. You can use Hostname, IP address, or NetBIOS name.
The source files must reside on an HTTP Web server.
For example, if your file uses the following object tag, replace
ENTER_SERVER_NAME with the computer name or IP
address where the installation source files are located:
<param name="ServerName"
value="ENTER_SERVER_NAME">
The virtual directory of the HTTP server that contains the
installation source files.
For example, if your file uses the following object tag, replace
ENTER_VIRTUAL_HOMEDIRECTORY_NAME with the name
of the virtual directory you created (such as Deploy\webinst):
<param name="VirtualHomeDirectory"
value="ENTER_VIRTUAL_HOMEDIRECTORY_NAME">
The file name of the Files.ini file. The default value for this
parameter does not need to be changed unless you've
renamed Files.ini.
The subdirectory that contains the source files to be
downloaded locally. This subdirectory contains the package
and Files.ini (for example, Webinst).
The minimum hard disk space requirement. The default
value is appropriate.
The abbreviation for the product. The default value is
appropriate.
Installing Symantec AntiVirus clients 147